Looking to really reduce your AR double-tap times?
You’ll want to go the lightweight low-mass bolt carrier group (BCG) route.
The BCG is the piece of metal moving back and forth between each shot. Lower the weight…and you’ll lower the disturbance to your rifle and sight picture.
We’ll cover the most popular ones out right now, other upgrades you should do at the same time, and reliability concerns.
Sneek peak, here are our top picks for lightweight BCGs:
- The Feather Weight: JP Enterprises Ultra Low Mass BCG
- Cost Conscious: Faxon Lightweight BCG
- Editor’s Choice: Rubber City Armory (RCA) Titanium BCG
Why Get a Lightweight BCG?
As we mentioned above…lowering the mass of the primary thing moving around in your rifle is going to help minimize the overall movement.
This will let you get back on target faster and reduce the felt recoil.
The normal advice is to use the full-auto (FA) BCG compared to the lighter semi-auto BCG when used in rifles where reliability is key.
And don’t worry…full-auto BCG’s are perfectly legal. It’s the trigger group that makes something actually full-auto.
The extra mass of FA BCG’s keeps things running smoothly in over-gassed AR-15’s that were made to run a variety of ammo and in crappy environments.
Since you’re looking at lightweight BCG’s…you’re probably messing around with a secondary AR-15…likely for competition.
You probably won’t be scrounging for ammo on the battlefield so you can lower the amount of mass needed to make your rifle still run 100%.
I know what you’re thinking…
What about using the lighter semi-auto BCG?
It’s only slightly less weight at 10 oz and change compared to the FA of 11.5 oz…while the ones we’re going to talk about are getting down to the 5 oz range.
How Do You Lower the Mass of BCG’s?
First…you can cut away “unnecessary” parts of the steel carrier.
And second…you can use more exotic materials that weigh less.
You’ll see a mixture of these two types of mass lowering techniques in our roundup.
Speaking of which…let’s get started!
Best Lightweight BCGs
We’ve tried out three of the most popular ones on the market…
- Weight: 8.9 oz
- Price: $335
- Material: Steel
- Notes: No serrations for use of the forward assist
JP was one of, if not the first, major company to sell lightweight BCGs. For a while, they stopped, but now they are back at it again with their Low Mass Operating System (LMOS) models.
We’re at around the 1000 round count and don’t see any major wearing…just sweet low recoil shooting. It’s made of steel so it should keep on chugging.
Just keep in mind that you’ll lose the use of your forward assist function (who has ever actually used their forward assist though?).
*EDIT* I originally stated that this model was aluminum.
- Weight: 5.8 oz
- Price: $437
- Material: Aluminum
- Notes: Lightest BCG on the market today
This new BCG from JP recently came out so we haven’t gotten our mitts on it yet…but we had to include it since it truly is ULTRA low mass.
But with great weight reduction comes great cost.
Both monetarily and reduced life. Because the BCG is the same material as your upper receiver (aluminum)…it will see some wear and degradation as it does its job…to a point where you have to get a new one. For that reason, JP recommends that you use the Ultra only in competition rifles.
It now has forward assist capabilities, but after a couple thousand rounds you’ll have to junk it for a new one.
- Weight: 8.5 oz
- Price: $249
- Material: Steel
From Faxon, maker of affordable and great barrels comes their lightweight steel BCG. Check out all of those weight reducing cuts!
Since it’s steel…the carrier should last almost indefinitely like its semi and full-auto brethren.
We’ve been running it in our overall super lightweight build for around 800 rounds and it’s been running smooth as butter.
The price is right too at about $200 less than the normal JP aluminum BCG and even less weight. Just good luck finding it in stock!
- Weight: 8.8 oz (with bolt)
- Price: $215
- Material: Steel
- Notes: Carrier only…you’ll need a bolt from somewhere else, plus no forward assist serrations
Since at the time of publication the Faxon was sold out everywhere…I’m throwing in JP’s steel version for price-conscious lightweight aficionados.
The weight is on par and you’ll save if you scrounge up a bolt from a previous BCG.
Thank you, titanium, for bringing the best of both worlds…the lightness of aluminum but the durability of steel.
- Weight: 7.8 oz (with bolt)
- Price: $360
- Material: Titanium
You’ll shave off 32% of the weight compared to a standard BCG, but you won’t run into the wear problems of aluminum carriers.
I’ve been running the RCA for over a year (estimate 2500 rounds) in my competition build and I’m still not tired of tapers showing me the touching double-taps I get on targets.
What Other Mods?
Since the AR-15 is a well-oiled machine where multiple parts have to work together…you can’t just change up 30% of one thing without having to mod others.
Here’s what I found to have the best reliability combined with a lighter BCG.
Gets rid of the *sproing* of the regular buffer tube spring…and makes your AR-15 feel and shoot SO much better. Especially needed since the standard buffer and spring are too heavy/stiff for your lightweight BCG.
Opt for the spring kit if you decide to go this route. I originally got the single pack and needed the lightest spring to go with my RCA BCG.
The kit lets you customize things to just how you like them.
You’ll really want an adjustable gas block since you’ll need less gas to move the lighter BCG. Otherwise, you’ll have a really fast moving BCG which might actually increasefelt recoil and damage parts.
So there you have it…our list of the best lightweight BCG’s on the market right now.
Want more awesome AR-15 reviews and guides? Take a look at this!
Related AR-15 Posts:
- The Definitive Ultimate AR-15 Rifles Resource & Guide
- Complete Armalite AR-15 Semi Automatic Assault Rifle Buyer’s Guide
- Best AR-15 Upgrades
- Common Rifle Bullet Calibers/Cartridge Guide
- Best AR-15 Ammo for the Range & Home Defense
- Protect Your Firearms with Camouflage Gunskins